ALFA ROMEO SPIDER
ALFA ROMEO GTV6
ALFA ROMEO MILANO / 75
FIAT 500X

DODGE DART - 1.4L , 2.4L, & 2.0L

HPSI SILICONE RAM AIR SYSTEM

INSTALLATION

INSTALLATION FOR 2013

ABOUT OUR RAM AIR SYSTEM

HPSI proudly introduces the first full silicone ram air system for all Dodge Dart Engines. This ram air system is fully compatible will all Dodge Dart intake systems, and utilizes the ultimate thermal and flow qualities of silicone.

 

Designed and manufactured with 5 layers of high strength, reinforced 100% silicone. Our silicone is designed to withstand 600F and up to 100psi of pressure without collapsing under vacuum. As a worthy addition to our line of Dart intake systems, this ram air piece seals the intake to direct airflow from the front of the car, rapidly decreasing intake pressure drop and intake air temperatures as the vehicle moves forward. This ram air piece includes stainless steel guarded clamps. 

 

 

RESEARCH & TESTING

Our silicone is some of the best on the market. THE ADVANTAGES IN HEAT RESISTANCE OVER ANY ALUMINUM PIPING AND STOCK PLASTIC PIECES ARE SIMPLY ENORMOUS.

 

For example, the thermal conductivity factors of both materials:

-Aluminum: 237.0 w/mk

-HPSI Silicone: 0.20 w/mk

 

The design of this silicone piece is aimed at providing cold, high pressure air to the intake system in real world environments and conditions. As the car moves forward, our ram air system routes our intake filter directly to air flow at the front of the car, decreasing temperatures in the intake system and providing high density air pressure directly to the turbo or throttle that other intakes simply cannot do. This silicone material is superior at maintaining low temperatures and efficient flow volume over the stock baffling.

 

RAM AIR TEMP AND PRESSURE TESTING RESULTS:

COMING SOON

 

Ducting high pressure air to the intake system properly results in even lower intake temperatures, more efficient power and sharper throttle response.

HPSI SILICONE INTAKE - Dart 

PERFORMANCE

COMING SOON

HPSI SILICONE INTAKE - Dart 

APPLICATION

2013   Dodge Dart 1.4, 2.0, 2.4 Engines  MT/AT   (COMPLETED)

2014   Dodge Dart 1.4, 2.0, 2.4 Engines  MT/AT   (COMPLETED)

2015   Dodge Dart 1.4, 2.0, 2.4 Engines  MT/AT   (COMPLETED)

-Reported wheel figures measured on DynoJet Dynamometer with a US Spec 2013 Dodge Rallye 1.4L Turbo DDCT, using STD correction and a performing of multiple runs. Results will vary depending upon environmental conditions, vehicle, transmission, vehicle health, operating conditions, temperatures, fuel grade, dyno type, dyno setup, and other modifications.